Extension Strips
Extension Strips
How many do I need? 30 cm each
- Your kit
- Extensions (30 cm each)
- Fits Underglow Pro Series kits only
- 3-pin waterproof plug
Couldn't load pickup availability
Fix it in minutes, not a new kit.
Replace just the piece you need. Every part plugs straight into your Pro Series kit.
- Fits Pro Series kits only
- 3-pin waterproof plug
- IP68 sealed strips
- No tools needed
Pro Series part
- The part you selected
- Sealed 3-pin waterproof plug
| Plug | 3-pin waterproof with sealed collar |
|---|---|
| Fits | Underglow Pro Series kits only |
Front strip · 60 cm
- 1 × Pro Series front LED strip (60 cm)
- Sealed 3-pin waterproof plug, already attached
- Adhesive backing for mounting
| Length | 60 cm (23.6 in) |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
Front strip · 90 cm
- 1 × Pro Series front LED strip (90 cm)
- Sealed 3-pin waterproof plug, already attached
- Adhesive backing for mounting
| Length | 90 cm (35.4 in) |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
Side strip · 150 cm
- 1 × Pro Series side LED strip (150 cm)
- Sealed 3-pin waterproof plug, already attached
- Adhesive backing for mounting
| Length | 150 cm (59.1 in) |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
Side strip · 180 cm
- 1 × Pro Series side LED strip (180 cm)
- Sealed 3-pin waterproof plug, already attached
- Adhesive backing for mounting
| Length | 180 cm (70.9 in) |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
Rear strip · 60 cm
- 1 × Pro Series rear LED strip (60 cm)
- Sealed 3-pin waterproof plug, already attached
- Adhesive backing for mounting
| Length | 60 cm (23.6 in) |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
Controller harness
- Heavy-duty wiring harness
- Control box
- On/off switch
- Remote control
| Control | Bluetooth app and remote |
|---|---|
| Plugs | 3-pin waterproof |
| Fits | Underglow Pro Series kits only |
Replacement remote
- 1 × remote control
| Works with | Underglow Pro Series controller |
|---|---|
| Fits | Underglow Pro Series kits only |
Extension cable
- 1 × 6.5 ft extension cable
- 3-pin waterproof plug on each end
| Length | 6.5 ft (2 m) |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Use | Adds reach between the controller and a strip |
| Fits | Underglow Pro Series kits only |
Y-cables
- Y-cable splitter (as pictured)
- 3-pin waterproof plugs
| Use | Runs two strips from one plug |
|---|---|
| Plug | 3-pin waterproof with sealed collar |
| Fits | Underglow Pro Series kits only |
2 extension strips
- 2 × Pro Series LED strips (30 cm each)
- Sealed 3-pin waterproof plugs
| Length | 30 cm (11.8 in) each |
|---|---|
| Adds | 60 cm in total |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
6 extension strips
- 6 × Pro Series LED strips (30 cm each)
- Sealed 3-pin waterproof plugs
| Length | 30 cm (11.8 in) each |
|---|---|
| Adds | 180 cm in total |
| Waterproof | IP68 |
| Fits | Underglow Pro Series kits only |
3-pin, sealed, click-and-twist
Every Pro Series part uses the same 3-pin plug with a red rubber seal. Line up the pins, push the ends together and tighten the collar until the seal is hidden. Water and road salt stay out.
Swap it in 3 steps
- 1
Unplug the old part
Unscrew the collar on the 3-pin plug and pull the two ends straight apart. Peel the old strip off.
- 2
Mount the new one
Wipe the spot clean and dry, peel the adhesive backing and press the new part firmly into place.
- 3
Click it in and ride
Line up the 3 pins, push together and tighten the collar until the red seal is hidden. Switch on and you're done.
Questions, answered
Not sure which part you need? Send us a photo of the old one and your order number and we'll tell you.
Contact usWill this fit my kit?
Parts and strips fit Underglow Pro Series kits only. They use our 3-pin waterproof plug, so they won't connect to older kits or other brands.
Which strip length do I need?
Order the same length as the strip you're replacing: front and rear strips come in 60 or 90 cm, side strips in 150 or 180 cm. Not sure? Measure the old strip end to end, or send us your order number and we'll check for you.
Will a new strip match my other strips?
Yes. Replacement strips are the same Pro Series strips that come in the kit, so they match the brightness and colour of the rest of your setup.
Can I replace just one strip?
Yes. Every strip is sold on its own, so you only pay for the one you need.
Is my broken part covered by warranty?
Every kit comes with a 1-year limited warranty with one free replacement for defects. If your part stopped working on its own, contact us before you order. Want extra cover? Add Underglow Care+.
Do I need tools or a pro to install it?
No tools needed. Parts plug straight into your existing kit. For the full walkthrough, see our install guide.