Your glow, in your pocket.
Set up the app, learn every mode, save favourites to the remote and put your lights on a schedule.
- FreeiOS and Android
- BluetoothNo Wi-Fi needed
- 4 modesDynamic, Solid, Music, DIY
- 54+Preset scenes
Download it in a minute.
The app is free on the App Store and Google Play.
Scan the QR code
There's a QR code on the controller and in the user guide in the box. Scan it with your phone's camera to go straight to the app.
Or search the app store
Search for the app by name on the App Store or Google Play.
- iPhone or Android phone
- Bluetooth on
- Location on (Android only)
- Kit installed and powered
Paired in four steps.
It takes about two minutes the first time. After that, the app reconnects on its own.
-
1Step 1
Power on your lights
Make sure the kit is installed and has power before you open the app.
- Flip the switch in the cabin to on.
- The lights should come on in their last setting.
- Keep your phone within a few metres of the controller.
TipNot installed yet? Follow the install guide first, then come back. -
2Step 2
Open the app and allow access
The app talks to the controller over Bluetooth, so it needs permission to find it.
- Turn on Bluetooth on your phone.
- Allow Bluetooth when the app asks.
- On Android, also allow Location. Android needs it to scan for Bluetooth devices.
- Allow the microphone if you want music mode to use your phone's mic.
-
3Step 3
Add your controller
Tap the + button in the top-right corner of the home screen and pick your controller from the list.
- Wait a few seconds for it to show up.
- Tap it to connect, then pick a scene to check it's working.
- If more than one shows up, turn one kit off to tell them apart.
TipOnly one phone can be connected at a time. Close the app on other phones first. -
4Step 4
Name it and check for updates
Open the settings icon in the top-right corner of the controller's page.
- Rename it, for example "Underglow".
- Run a firmware update if the app offers one.
- That's it. Next time, the app reconnects on its own.
Four ways to glow.
Switch modes from the tabs at the top of the app.
Dynamic
54+ preset scenes that flow along the strips.
- Pick a scene, then set the speed.
- Change the effect length and brightness.
Solid
One steady colour, any shade you like.
- Tap a preset swatch or use the colour wheel.
- Dial in the brightness.
- Great for car shows and matching your paint.
Music
The lights move to the beat.
- Use your phone's mic or music player.
- Or use the controller's built-in mic. No phone needed.
- Try a few music modes to find your favourite.
DIY
Build your own look, colour by colour.
- Choose the colours in your sequence.
- Pick how they move: chase, gradient and more.
- Save it to recall it later.
Save it once. Recall it from the remote.
Found a look you love? Save it as a favourite in the app, then switch to it with the included remote. No phone, no app open.
- Save your favourite scenes and colours in the app.
- Call them up from the remote in one press.
- The remote also does power, brightness and speed.
On at dusk. Off when you're done.
Set an on time and an off time in the app's settings, and the lights take care of themselves.
- Turn the glow on for a show or a night out, automatically.
- Make sure nothing stays on overnight.
- Change or switch off a timer anytime in the app.
The handy extras.
Tap the settings icon on the controller's page to find these.
- Power-on effectChoose the effect the lights show when they switch on and off.
- Rename your controllerGive each kit its own name so it's easy to find when you have more than one.
- Firmware updatesThe app updates the controller over Bluetooth when a new version is out. Keep the phone close while it runs.
- Speed and brightnessEvery mode has its own speed and brightness, so a slow cruise and a full show are one tap apart.
- Engine Lighting on the same appEngine Lighting plugs into your Underglow controller, so it follows the same app, scenes and remote.
- The remote works on its ownNo phone, no app, no Bluetooth needed. The remote talks to the controller directly.
Quick fixes.
Most connection problems are solved in under a minute.
-
The app can't find my controller
- Check the lights have power and the cabin switch is on.
- Turn Bluetooth on, and Location on Android.
- Close the app on any other phone that's connected.
- Move closer, then pull down to refresh the list.
- Still nothing? Switch the lights off for 10 seconds and back on.
-
It connects, but the lights don't change
- Make sure you're on the right controller if you have more than one.
- Check the brightness isn't turned all the way down.
- Force-close the app and connect again.
-
Music mode isn't reacting
- Allow microphone access for the app in your phone's settings.
- Turn the music up or move the phone closer to the speaker.
- Try the controller's built-in mic instead of your phone's.
-
Some strips are dark or the wrong colour
- Check every connector is pushed in and locked.
- Check the arrows on each strip point toward the rear.
- See the install guide's connect step for the wiring order.
App questions.
Still stuck? Send us a screenshot and your order number and we'll help.
Is the app free?
Yes. It's free on the App Store and Google Play, with no subscription.
Do I need Wi-Fi or mobile data?
No. The app connects to the controller over Bluetooth. You only need internet to download the app and run firmware updates.
Can more than one phone control the lights?
Yes, but one at a time. Close the app on the first phone, then connect from the second.
Do I need the app to use the remote?
No. The included remote works on its own, including your saved favourites.
Will the timer turn my lights on when the car is off?
Only if the controller has power. Kits wired straight to the battery keep their timers. Kits wired to ignition power only run while the car is on.
Are underglow lights legal to drive with?
Rules change by province and state. See our FAQ and check your local laws.
Need a hand?
Real people, here to help with setup, the app and your install.





